PRESS MOTION TUNING Available on Most Models
Heaviest Press Frames & Drives run High Strength, HSLA Materials with Ease
Link Motion Drive provides Soft Touch Tooling, Longer Tool Life,
Higher Production Rates, Lower Vibration & Reduced Reverse Tonnage.
3D SEQUENCE L to R:
1. Super Thick Longitudinal Bed Aprons Resist Deflection & Reduce Vibration
2. Uprights with Eight (8) Point Taper Wedge Slide Guides and Tie Rods
3. Thick Longitudinal Steel in Slide with Vertical Plunger Guides
4. LINK MOTION Short Power Path Drive Assembly
5. Double Thickness Fully Enclosed Crown, Link Motion Drive, Double Pitman’s
with Gears on Centerline that connect to Dual Plunger Guides
6. EHL-660-144-60 Press Assembled
1. Super Thick Longitudinal Bed Aprons Resist Deflection & Reduce Vibration
2. Uprights with Eight (8) Point Taper Wedge Slide Guides and Tie Rods
3. Thick Longitudinal Steel in Slide with Vertical Plunger Guides
4. LINK MOTION Short Power Path Drive Assembly
5. Double Thickness Fully Enclosed Crown, Link Motion Drive, Double Pitman’s
with Gears on Centerline that connect to Dual Plunger Guides
6. EHL-660-144-60 Press Assembled
ACTION
- Increased Acceleration
On Downstroke - Reduced Slide Speed Near BDC (Material Contact)
- Greater % Of The Cycle Spent In Contact with Material
- Increased Material Forming Time
RESULTS
- Reduced Reverse Tonnage
- Reduced Vibration
- Higher Output Speeds (SPM)
- Reduced Material Springback
- Reduced Requirements for Secondary Operations
- Reduced Press Maintenance Costs
- Greatly Increased Tool Life