We are committed to keeping your metalforming operations at the forefront of efficiency and innovation. That's why we're reaching out to customers with presses from Sutherland built between 2002 and 2016. These presses came with either a Mitsubishi or a Sunne control system.
Now, as a standard, all our presses come equipped with the I-PRESS® & Automation Control System, and we continue to offer service, spare parts, and troubleshooting for Sunne and Mitsubishi controls.
However, for complete transparency, we must inform you that obtaining parts for these legacy systems is becoming increasingly difficult, and lead times are lengthening.
Also, while those older control systems served you well, they simply can't handle the current demands of the metalforming industry.
Today the next-level of control systems is needed: safer for operators, more scalable for evolving needs, adaptable to technology changes, and ready to seamlessly integrate with the future of manufacturing – Industry 4.0
In response to the industry demands, Sutherland developed the I-PRESS® &Automation Control System. This more intuitive PLC and software-based control system, with Industry 4.0 capabilities, simplifies user learning, setup, and navigation. It eliminates the common frustration of complex menus found in other press builders' systems.
To help you prevent downtime caused by the older control system we recommend upgrading your presses equipped with Sunne or Mitsubishi controls to the I-PRESS® system. This is our patented control system, for which we can guarantee results, functionality, parts availability, and ongoing support for years to come. Our retrofit program is also available for mechanical pressesand forge presses from all brands.
If you have an interest in upgrading your mechanical presses with new controls, reach out to Service@SutherlandPresses.com
Visit our Online Simulator to operate and get to know I-PRESS >
No Black Box Technology - Performance Monitor Visual Main RunScreen - 12 Programmable Cams - 16 Die Monitoring Channels - 200 Job Memory isexpandable - 2 & 4 Point Tonnage Monitor with Reverse Tonnage Read OutProgrammable for each Job, 4 Parts Counters - Maintenance Counter - Total LifeCounter -PLC I/O Monitors - Safety I/O Monitors - Fault History - FaultDiagnostics - Fault Library - Lubrication Control - Light Curtain Full Time orMute on Upstroke - Special Modes of Operation Single on Demand, Continuous onDemand, Micro Inch - Dual Valve Reset - Encoder Overrun Reset - Language -Ejector Dwell Time - QDC Control and many more.... Limited to your imagination,we do custom programs.
Learn how one of our Fortune 500 customers with over 40 presses made 114 million strokes in 3 years with No Unplanned Downtime. All presses with I-PRESS® controls.
Chris Wei
Mobile: +1-626-922-0518
I can reduce your downtime!
We are committed to keeping your metalforming operations at the forefront of efficiency and innovation. That's why we're reaching out to customers with presses from Sutherland built between 2002 and 2016. These presses came with either a Mitsubishi or a Sunne control system.
Now, as a standard, all our presses come equipped with the I-PRESS® & Automation Control System, and we continue to offer service, spare parts, and troubleshooting for Sunne and Mitsubishi controls.
However, for complete transparency, we must inform you that obtaining parts for these legacy systems is becoming increasingly difficult, and lead times are lengthening.
Also, while those older control systems served you well, they simply can't handle the current demands of the metalforming industry.
